Replacing Lock on uPVC Door
To replace the lock, you need to first remove the screw holes and handle. This is typically easy to do.
Then, locate the screw that is inserted into the lock barrel. This is usually colored differently than the other screws, and is situated on the edge of the faceplate of the lock.
Remove the Cylinder
To change the locks on your Upvc doors first, you need to take off the cylinder that is currently in use. This is a relatively simple process that can be accomplished within 30 minutes. All you need is an ordinary screwdriver. You'll need to locate the Euro cylinder fixing screw, which is usually on the inside edging of the door, next to the lock cylinder. The screw is usually different in color from the other screws and is easy to identify. Take the screw off and store it in a safe place.
After removing the cylinder, you can begin to remove the handle. To accomplish this, you'll have to open the door wide enough that you can see the inside edge of the door as well as the faceplate of the lock.
Remove the screw that holds the handle to the door using the screwdriver. Once the screw has been removed you can pull the handle towards you, and then take the rest of it off the door.
If you're having trouble getting the handle off the door frame, you might have to unscrew it. This can be done with the aid of a screwdriver or drill, and you'll need be careful not to strip the screw head or cross-thread the screw.
When you are ready to replace your cylinder, be sure that it's the right size for your door. Cylinders are measured based on two measurement points: (a) the distance from the centre of the Fixing Screw hole to the bottom of the cylinder and (b) the distance between the keyhole and the edge of the lock plate.
Take the handle off
If your door handle made of upvc becomes stiff, loose or floppy, the good news is that this is a fairly simple problem to fix. The cause is usually due to wear and tear of the cylinder or internal parts of the multipoint lock, that are located inside the door between the handle and the frame. It is not uncommon for upvc locks to wear out due to extreme weather conditions, heavy use or simply aging. This can cause problems with the locking or closing mechanism of the door.
The cylinder could wear out and make it difficult to turn the key. window locks repair could also become stiff, causing the handle to drop. This can be resolved by replacing the cylinder which is a straightforward procedure. This can be accomplished by yourself, but you'll need to have some knowledge about the mechanism's operation. You will need to remove the handle in order to replace the cylinder.
You'll need an electric screwdriver and measuring tape to do this. It is important to know the exact dimensions of the cylinder you have in place to be able to get a replacement cylinder that fits. The cylinder is the element that locks your door made of upvc, and it is important that you ensure that you get a replacement of the same size.
To take off the old cylinder, it is have to remove the screws which hold it in place. Be careful not to strip the screws, as this can make it very difficult to remove them in the future. After the screws have been removed the cylinder will slide out easily.
Remove the Lock Barrel
Upvc is a strong material that is designed to ensure that you and your family are safe. They are available in different styles and colors that will fit any style. These doors are also maintenance-free and energy efficient. However, they aren't without their drawbacks. Over time the locking point or barrel lock may fail and need to replaced. It's a simple process, but you should be aware of a few points before you begin.
You'll have to take off the door handle to reach the screw that holds the lock cylinder in place. The screw is typically different in color from other screws and can be found near the keyhole on the door's edge. Remove this screw and place it in a safe place. Next, carefully remove the outside and inside door handles. Make sure to take your time and not move too fast, as it may damage your uPVC door.
After taking the handles off then, you can use a screwdriver and take off the screws that attach the handles to the door frame. This will allow you better access to the pins that hold the cylinder in place. You can then pull and wiggle the cylinder to see if this will loosen it. When it is loose, pull it towards you, and then pull it out of the socket.
Once you have removed the old lock cylinder, it is essential to replace it with a brand new one that is anti-snap as well as anti-bump security. You can do this yourself if have the tools you need, or you can hire a professional locksmith to do it for you. This is a relatively easy job that should take only five minutes to complete.
Install the New Cylinder
A door lock made of upvc could be broken or damaged in a variety of ways, for instance, a tenant might have moved out but not returned the key, or the cylinder might have been damaged and no longer works as it should. Whatever the reason for replacing your Upvc lock, it's important that you choose the right size replacement. If the wrong lock is installed, your doors may be more vulnerable to the 'lock snapping method which is the reason for 25 percent of burglaries.
To avoid this it is vital that the correct cylinder is installed and the procedure for doing this is fairly simple and takes just five minutes. To change the cylinder and handle faceplate you must remove the screws that are attached to them.
Make sure that you open the handle and gain access to the lock cylinder located on the faceplate side of the handle. This will allow you to easily remove the lock cylinder from the handle without the need to move it or expose the inside of the frame.
Then, remove the old cylindrical device and measure it. It is important to know its overall length and the size of the cam that is used to lock or open the door. This will help you to locate a replacement that is similar in size or smaller and this is the most important part of the entire process. A cylinder must be flush with the backplate of your handle and have no more than 5mm protruding from it.
Install the Handle
A upvc lock can jam if something breaks inside the case which controls the bolts that retract into the keep plate or strike. It is often fixed by altering the Allan key that is located beneath the hinges. However, this can occasionally cause excessive stress on the parts within the casing in the middle and it is recommended to seek out a professional.
During the changing process it is important to have quick and easy access to both sides of the handle, as well as having the right tools. It is also recommended to prop the door open to ensure it doesn't close during the process.
The first step is to loosen the screws that hold the handle in place with an screwdriver. Once the screws are loosen, you can remove the handle. After taking off the cylinder and the handle, it's time to install the replacement handle. Make sure the new handle is the right size for the cylinder you have currently and hole center. To determine the proper size you need to measure the length of the spindle on the lever you currently have. Make sure that the screw fix centre on the handle is identical to the screw fix centre of your existing hole centre or cylinder.
Replacement handles from Fab and Fixed are available in various designs and are made to last. These handles are perfect for those looking to improve their upvc handle and increase security for their home. The correct handle will make your home safe and secure, as well as making it difficult for burglars to break into.